IPB

Здравствуйте, гость ( Вход | Регистрация )


Свадебный Портал
Все о свадьбе
Годовщины свадеб
Поздравления
Сценарий свадьбы
Выкуп невесты
Советы
Деньги
Букет невесты
Венчание
Девичник
Медовый месяц
Обручальные кольца
Первая брачная ночь
Подарки на свадьбу
Свадебные конкурсы
Свадебные приметы
Тосты на свадьбу

> 

Установите счетчик и ссылка на ваш сайт появится на нашем портале.

 
Reply to this topicStart new topic
> iMachining 2.0.14 (x64) for NX, iMachining 2.0.14 (x64) for NX
apple2000
сообщение 22.2.2020, 4:45
Сообщение #1


Опытный участник
***

Группа: Пользователи
Сообщений: 8 941
Регистрация: 19.11.2018
Пользователь №: 35 204



iMachining 2.0.14 (x64) for NX

Изображение

iMachining 2.0.14 (x64) for NX | File size: 650 MB
[/b]



The Revolutionary CNC Milling Technology - now integrated inSiemens NX. Finally, all the promises of a TRUE REVOLUTION in CNC machining are actually delivered - breakthrough Technology brought to Reality by iMachining !


iMachining - with its unique patented "morphing spirals", intelligent island separation and moating, achieves the shortest cycle times in any industry - in any material, on any machine.
The cutting angle constantly adjusts between a minimum and a maximum value, while the feed is dynamically adjusted to ensure constant mechanical and thermal load on the tool - providing you with the longest tool life at the highest Material Removal Rate (MRR) possible.

Since spirals have higher MRR than Trochoidal tool paths, iMachining utilizes various, patented strategies that enable it to use spirals much more often than Trochoidals.

iMachining automatically reduces vibrations to prevent excessive tool wear and also decreases the likelihood of forming temporary thin walls that often lead to costly tool damage.
Using advanced rest material knowledge, iMachining maintains the highest level of cutting tool engagement by avoiding "air-cuts" and repositioning moves.
The iMachining Technology Wizard provides automatic, optimal feed and speed values for different materials and CNC machines to ensure "first-cut" success.

Saves 70?% and more in CNC Machining Time
The unique iMachining toolpath, with fully optimized feeds & speeds, keeps the cutter at maximum efficiency and ensures a maximum material removal rate. Exact stock rest material machining and finish cuts eliminate air cutting and unnecessary tool retracts.

Drastically extends Tool Life
With iMachining, the average Tool life increases by 5 times or more. Machining at full depth-of-cut ensures that the entire tool is utilized rather than only the bottom part. Optimum cutting conditions reduce tool wear and increase process stability to avoid uncontrolled tool breakage especially when using small and fragile tools. iMachining eliminates the cost of premium and specialty tooling for hard materials.

Shortens Programming Time
The Technology-Wizard provides optimal feeds & speeds, and step-over to ensure time-saving first-part success. The much shorter and simpler programming procedure of iMachining results in greatly increased CAM productivity.

iMachining Technology Wizard
The exclusive, patented Technology Wizard takes out the guesswork by automatically providing all machining parameters. The industry's first and only TRUE Wizard uses an advanced, patented technology that automatically produces optimized feeds, speeds, depth and width of cuts - all specifically for your CNC machines, your materials and your tools.

The iMachining Wizard
The Technology Wizard is the perfect tool for even the most seasoned machinist for getting it perfectly dialed in, the first time - or for the less experienced machinist, iMachining will turn them into an expert in no time.

The "iMachining Level" lets the user choose from 8 levels to automatically adjust for "real-world" fixture, tool holding and CNC machine conditions. The levels make it easy to overcome common challenges with spindle-rigidity, fixture-rigidity and excessive tool deflection.

Seamless Integration of iMachining in Siemens NX
The proven iMachining technology is now available as an integrated plugin for Siemens NX. CAM users can now insert iMachining 2D and 3D operations directly inside NX CAM, using all NX functionality.

Whats New:
Updates: official site does not provide any info about changes in this version.

HOMEPAGE
spamwww.imachining4nx.com/


[b]DOWNLOAD LINKS :


Код

https://nitroflare.com/view/5F314C431876F49/BaDshaH.iMachining.2.0.14.for.Siemens.NX8.5-1899.Series.Win64-SSQ.rar

https://uploadgig.com/file/download/0479d51bF3805f8c/BaDshaH.iMachining.2.0.14.for.Siemens.NX8.5-1899.Series.Win64-SSQ.rar

https://rapidgator.net/file/f903d490ef7a9df3cc55401a4bfe7ca0/BaDshaH.iMachining.2.0.14.for.Siemens.NX8.5-1899.Series.Win64-SSQ.rar.html
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Reply to this topicStart new topic

 

- Текстовая версия Сейчас: 9.4.2020, 21:22
.